StemCell Therapy

US researchers continue ongoing research into 3D printed pharmaceuticals, presenting their unique findings in Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials-Process Perspective.

While many have predicted that the pharmaceutical industry was perched on the edge of a massive transformation due to the advantages offered by 3D printing, there are still many ongoing studies regarding suitable printers, materials, and critical issues such as the impacts of DIY drugs and more formalized manufacturing. In this study, the researchers examine both extrusion-based FDM 3D printing and pressure-assisted micro-syringe 3D printing as they compare them to more traditional processes, along with techniques, challenges, and consider the general direction of the industry overall.

Within the pharmaceutical industry today, 3D printing has made impacts in digital fabrication of drugs, implants, drug delivery systems, and more; however, the researchers point out the importance of such processes especially in creating personalized medications. Citing the success, and FDA approval, of epilepsy drug SPRITAM, the authors stress advantages in the trend toward patient-specific treatmentand specifically, medicine.

Current pharmaceutical manufacturing practices are not costeffective for personalized medicine, state the researchers. 3D printing pharmaceuticals are more suitable than current manufacturing practices for tailored solid dosages.

Although the first waves of pharmaceutical 3D printing began with inkjet printing, strides since then have been not only impressive, but fascinating to much of the public, including:

FDM and PAM printing processes have been most attractive to users due to accessibility and affordability, the potential for fabricating and tuning complex geometries, and more.

(a) The proportion of research articles published on different types of 3D printing processes in the last five years (20152019, total 202 articles); (b) The number of published scientific articles (research and review) in the period from 2015 to 2019 which reported the use of extrusionbased (fused deposition modeling (FDM) or pressureassisted microsyringe (PAM)) 3D printing (source: Scopus database and PubMed).

Choosing the right materials is critical to the success of 3D printing medications also, along with the capability for attaining FDA approval. As a highly suitable material, polymers may be used to print the following in relation to tablets and caplets:

Polymers multifaceted utilization in solid dosage drug delivery systems solidifies its importance in pharmaceutical 3D printing applications, state the researchers.

2dimensional (2D) schematic of the extrusionbased 3D printing process: (a) fuseddeposition modeling (FDM), (b) pressureassisted microsyringe (PAM).

And while they have reviewed studies from multiple other scientists, the authors here point out that while such guides are needed, no detailed discussion on how polymers should be selectedalong with other detailsexists.

Comparison of FDM and PAM 3D printing technologies

Processing is very similar via FDM or PAM, with the extra benefit of being more environmentally friendly, offering the ability for remote control of printing, and small batch, on-demand printing.

Comparison of different processing steps required for traditional direct compression (DC) tablet manufacturing vs. advanced manufacturing, 3D printing (FDM or PAM).

Typical polymers that can be used for 3D printing in pharmaceuticals include:

Summary of polymers based on (a) water solubility and drug release type, (b) their selection for either FDM or PAM 3D printing method.

Obviously, the pharmaceutical industry is highly regulated, with good reason, and the production of medications can be complex due to stringent requirements in production for the safety of the patient. In terms of 3D printing, however, a list of challenges still present themselves such as lack of predictability and consistency in quality of product due to issues like shrinkage or warping, problems with mechanical stability and other properties, and more.

Though a large-scale production of pharmaceuticals using 3D printing might be a long way from now, personalized medicine is possible inhouse for immediate use, conclude the researchers. Future work to enable drug product manufacture using FDM and PAM 3D printing technologies should include the suitability and characterization of polymers and other excipients amenable to processing.

Polymer materials and their properties, specifically their rheology should be investigated to allow a wider formulation and 3D printing design space. A better understanding of the rheological properties of APIpolymer mixtures and their measurement is necessary for the successful 3D printing of pharmaceuticals.

What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.

Characterizations required for 3D printed structure, drug, and polymer (or other functional excipients, if necessary).

Here is the original post:
US Researchers Provide Holistic Perspective on Extrusion-Based 3D Printing of Personalized Medicine - 3DPrint.com

This entry was posted on February 21, 2020 at 10:52 am and is filed under Personalized Medicine. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed. |